Bunn FMD2, Model# SET00.0200FMD2 2 - 4lb hoppersBrewing capacity: 4.2 gallons per hourStandard Display•Space saving narrow 8" (20.3 cm) cabinet width.
•Variable speed hopper motors offer a wide range of product mix ratios (0.75 to 6.6 grams of powder per second).
•Large easy-to-fill translucent hoppers ensure quick and timely refilling.
•Lighted graphics merchandise drinks for maximizing profits.
•Large hot water reservoir provides 4.2 gal. (15.9 L) / hour serving capacity.
•Adjustable legs and drip tray allows up to 7" (17.8 cm) opening for 20 oz. cups.
•Specially designed mixing system guarantees perfect beverages every time.
•Improved automatic rinse reduces run-on after beverage is dispensed.
•Designed to be easily serviced from front and top of machine.
•Bunn-o-Matic SET00.0200 Specifications
•Crated Weight: 81.00 lbs.
•Category: Specialty Drink Dispensers
•Type: Hot Drink Machine
•Bunn Model: FMD-2 BLK
•Product #: SET00.0200
•Total Watts: 1800
•Cord Attached: Yes
•Dimensions: 30" H x 7.9" W x 21"D
•Power Cord: (NEMA 5-15P) 15 Amp-120V machine only.
•Electrical: Models require 2-wires plus ground service rated 120V, single phase, 60 Hz.
•Plumbing: 20-90 psi (138-621 kPa) from a 3/8" or larger supply line. A shut-off valve should be installed in the line before the unit. Install a regulator in line when pressure is greater than 90 psi to reduce it to 50 psi. Supplied with 1/4" male flare fitting.
If you would like to have your machine installed for a fee in the lower 48 states by a Bunn technician the rate is $86.25 for installation, calibration, service, and removal, during business hours. Off business hours it is $129.38 and holidays $172.50.Travel are the same rates mentioned above and management fee is $30.00 per service event. If you are more than 50 miles outside the location of the nearest Bunn dealership there is an additional fee of $ 86.25 to the initial installation fee.
Can not be shipped Parcel Post or UPS. UPC 072504047522